Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
ink is Offline
Contact ink:
Profile Info
Show content
This section allows you to browse the content for this member. Note that you can only see content for which you have sufficient viewing permissions.
Messages by ink
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
Don't get to excited this animation still has a long way to go...
Posted by ink
in Balthazar's stuff (Started by Balthazar August 19, 2011, 11:02:45 am
Board: Graphics
Thats a pretty cool little guy!
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
Getting there slowly. He just need some touch ups and color separation, then of course everything else.
Again a big thanks to Efex for Demitri's original sprite.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
I Like how this guy make sf3 Zangief is the right way on work.
That same guy made a great Demitri too. His name is Efex
I might move the arms in my animation a little to look more like his original sprite.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
I haven't figured out how serious he will be either. I am counting on you guys to speak up if you think anything seems out of place or weird for this project.
A bit further on this animation. He's definitely come to life.
I did some research and experimenting with the sprites size. Sadly the sprite sizes in SvC (mainly Hugo) are way off from what they should be. This size is actually very accurate if you think about each character standing straight up. there are very few sprites of the characters doing this but they were referenced.
Also, I found this artwork and wondered if I should be approaching it more like it..
Spoiler, click to toggle visibilty
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
Fuuuuck... that is an amazing idea JNP! Yep, thats what I'm doing.
or at least something like that. I will probably just edit his normal stance to be the Demon and we can figure out how to cut/mix the two later.
Posted by ink
in SSF2T Rips added Cammy (Started by Just No Point July 16, 2014, 06:09:35 am
Board: Resource Releases
I love this Cammy's sprites! Thanks for these.
Posted by ink
in Sabockee's Sprites 'n Such (Started by sabockee February 22, 2014, 01:43:03 am
Board: Graphics
I really love those last two sprites! Awesome work.
I love the bradded hair.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
My appointment didn't show for the day so I guess I will have a good bit of the day to make some progress on his stand animation.
I think I am just going to do his basic stand animation for now and later do some extra stuff in another cycle. hands opening and closing, blinking stuff like that.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
Thanks for all the feed back guys!
I really just like how much more serious he seems in SvC, but I am sure I can get that even if referencing DS/CFJ animations.
I think he's WAY too tall, though. Urien's 6'10" and Demitri's only 6'5".
I haven't actually figured out correct size just yet. The size you see in my out line is just a resize of a hires outline to match the size of Efex's sprite. I will be checking the size for accuracy, I usually just use a resizing ratio that should make everything perfect.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
That would be very helpful! thanks
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
I am going to guess that I don't know most of the differences JNP. I plan on mostly sticking to SvC animations just because they seem to match CPS3 a lot better. I am open to converting stuff from other appearances too though.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
I've started animating his stance. I still have a long way to go, just wanted to show some progress.
Back arm, cape and aura obviously still need to be added. I think I am going to have him rotate his fists slightly to make things more interesting. His legs are normally completely static but I haven't decided if I can do something subtle to change that or if it won't matter once the cape is put in.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
Welp, it's been a bit over a week for that poll and it looks like Demitri will stay in the lead. So I will start on him as soon as I get a chance.
I am hoping to have atleast an animation outline of his stance to show in the next couple day.
There is a good chance I will be using efex's sprite of him as reference.
Re: Jmorphman's WIP thread: updating again + the true meaning of Christmas
August 12, 2014, 02:53:54 am
View in topic context
Posted by ink
in Jmorphman's WIP thread: Rolento template up!!!! + the true meaning of Christmas (Started by Jmorphman November 01, 2010, 09:13:43 pm
Board: Projects
You could try making the letters red to yellow like it is in the background logo "jam"
I think that will make everything look pretty awesome together.
Re: Jmorphman's WIP thread: updating again + the true meaning of Christmas
August 10, 2014, 01:43:15 am
View in topic context
Posted by ink
in Jmorphman's WIP thread: Rolento template up!!!! + the true meaning of Christmas (Started by Jmorphman November 01, 2010, 09:13:43 pm
Board: Projects
I feel like the stage font does clash. Would it be look weird to just use the player select font?
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
I am really liking the reasoning behind everyones choices, some of which I have never took into consideration. thats probably the main reason I even started this thread to hear some really thoughts behind each character choice.
To be totally honest I didn't think Demitri would be a popular choice for some reason. I love him but I really thought he would be in the bottom.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
This may be a stupid question. Will you be coding the winning character too or just spriting him/her?
He doesn't/can't code.
Very true! I don't have/ won't make the time to learn.
I will be converting them that is all, at best be making a complete sff file.
Strider has been more or less an experiment on how I would go about adding to the SF3 sprite pool. Commissioning a coder and working back and forth with rough sprites is not for me. I will just be making sprite packs from now on if I do a full character.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
I'm going to make a stupid, stupid question. In case Dictator wins the poll; are you going to make him with or without his cape?
Definitely NOT a stupid question!! I have thought about that a lot myself. I am going to keep him without a cape, very close to how you see him in SvC. Strider has proved to be a very difficult first full character to take on, which is why I have chosen these characters... I am looking for something that will be a little bit easier for me to take on this time around.
I guess a cape could always be added at a later time though.
I personally think a super boss version of Dictator would be best with a cape. Maybe one that has limited moves lots of psycho power and his feet never touch the ground. (How I remember him in SF2 the animated movie)
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pm
Board: Sprite Projects
Wow, this got a bigger response then I thought it would!
People are already working on a SF3 Sagat with "acceptable" results
someone is already working on a sf3 sagat
This Sagat would be based off his SvC sprites so keep in mind he would be much different. Obviously I see that I could do a better job converting him then the current SFIII sprite attempt or I wouldn't have considered him an option. Not to step on anyone's toes.
Ink, you should make a poll about this.
Poll is up.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
Posted by ink
in Balthazar's stuff (Started by Balthazar August 19, 2011, 11:02:45 amBoard: Graphics
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
Again a big thanks to Efex for Demitri's original sprite.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
I Like how this guy make sf3 Zangief is the right way on work.That same guy made a great Demitri too. His name is Efex
I might move the arms in my animation a little to look more like his original sprite.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
A bit further on this animation. He's definitely come to life.
I did some research and experimenting with the sprites size. Sadly the sprite sizes in SvC (mainly Hugo) are way off from what they should be. This size is actually very accurate if you think about each character standing straight up. there are very few sprites of the characters doing this but they were referenced.
Also, I found this artwork and wondered if I should be approaching it more like it..
Spoiler, click to toggle visibilty
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
or at least something like that. I will probably just edit his normal stance to be the Demon and we can figure out how to cut/mix the two later.
Posted by ink
in SSF2T Rips added Cammy (Started by Just No Point July 16, 2014, 06:09:35 amBoard: Resource Releases
Posted by ink
in Sabockee's Sprites 'n Such (Started by sabockee February 22, 2014, 01:43:03 amBoard: Graphics
I love the bradded hair.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
I think I am just going to do his basic stand animation for now and later do some extra stuff in another cycle. hands opening and closing, blinking stuff like that.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
I really just like how much more serious he seems in SvC, but I am sure I can get that even if referencing DS/CFJ animations.
I think he's WAY too tall, though. Urien's 6'10" and Demitri's only 6'5".I haven't actually figured out correct size just yet. The size you see in my out line is just a resize of a hires outline to match the size of Efex's sprite. I will be checking the size for accuracy, I usually just use a resizing ratio that should make everything perfect.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
Back arm, cape and aura obviously still need to be added. I think I am going to have him rotate his fists slightly to make things more interesting. His legs are normally completely static but I haven't decided if I can do something subtle to change that or if it won't matter once the cape is put in.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
I am hoping to have atleast an animation outline of his stance to show in the next couple day.
There is a good chance I will be using efex's sprite of him as reference.
Re: Jmorphman's WIP thread: updating again + the true meaning of Christmas
August 12, 2014, 02:53:54 am View in topic context
Posted by ink
in Jmorphman's WIP thread: Rolento template up!!!! + the true meaning of Christmas (Started by Jmorphman November 01, 2010, 09:13:43 pmBoard: Projects
I think that will make everything look pretty awesome together.
Re: Jmorphman's WIP thread: updating again + the true meaning of Christmas
August 10, 2014, 01:43:15 am View in topic context
Posted by ink
in Jmorphman's WIP thread: Rolento template up!!!! + the true meaning of Christmas (Started by Jmorphman November 01, 2010, 09:13:43 pmBoard: Projects
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
To be totally honest I didn't think Demitri would be a popular choice for some reason. I love him but I really thought he would be in the bottom.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
Very true! I don't have/ won't make the time to learn.This may be a stupid question. Will you be coding the winning character too or just spriting him/her?
He doesn't/can't code.
I will be converting them that is all, at best be making a complete sff file.
Strider has been more or less an experiment on how I would go about adding to the SF3 sprite pool. Commissioning a coder and working back and forth with rough sprites is not for me. I will just be making sprite packs from now on if I do a full character.
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
I'm going to make a stupid, stupid question. In case Dictator wins the poll; are you going to make him with or without his cape?Definitely NOT a stupid question!! I have thought about that a lot myself. I am going to keep him without a cape, very close to how you see him in SvC. Strider has proved to be a very difficult first full character to take on, which is why I have chosen these characters... I am looking for something that will be a little bit easier for me to take on this time around.
I guess a cape could always be added at a later time though.
I personally think a super boss version of Dictator would be best with a cape. Maybe one that has limited moves lots of psycho power and his feet never touch the ground. (How I remember him in SF2 the animated movie)
Posted by ink
in Next CPS3 conversion project. Demitri (Started by ink August 04, 2014, 03:22:15 pmBoard: Sprite Projects
People are already working on a SF3 Sagat with "acceptable" results
someone is already working on a sf3 sagatThis Sagat would be based off his SvC sprites so keep in mind he would be much different. Obviously I see that I could do a better job converting him then the current SFIII sprite attempt or I wouldn't have considered him an option. Not to step on anyone's toes.
Ink, you should make a poll about this.
Poll is up.