YesNoOk
avatar

From full-screen to Window. (Read 587 times)

Started by DjFoxfire, September 27, 2008, 08:37:40 pm
Email this topic
View printable version
Share this topic:
Page 1 of 11   Go Down

DjFoxfire

From full-screen to Window.
#1  September 27, 2008, 08:37:40 pm
  • **
How do u change mugen from full-screen to window size (if u can that is.).

DarkStar

Re: From full-screen to Window.
#2  September 27, 2008, 10:01:45 pm
  • *
  • Hellz yeah!

Djoulz

Re: From full-screen to Window.
#3  September 28, 2008, 06:21:56 am
  • *****
  • Mang Of Steel
    • Canada
    • network.mugenguild.com/cybaster/hosted.html
OR you can always open your mugen.cfg file (located in mugen folder -> data folder) and change the followings:

[Video Win]
 ;Enter the width and height of the resolution you want to set here.
 ;The optimal resolution is 320x240, but if your video card has problems
 ;You may want to try 640x480.
Width  =[glow=red,2,300]320[/glow]
Height =[glow=red,2,300]240[/glow]

 ;This is the color depth at which to run MUGEN. You should set it to
 ;16 bit color unless your video card has problems with it.
 ;16-fastest, 24,32-slower, 8-slowest/worst
Depth =16

 ;Set this parameter to 0 to disable screen stretching, and set it to 1 if
 ;you want to scale it up to fit the current resolution.
Stretch =[glow=red,2,300]0[/glow]

Soiuku

Re: From full-screen to Window.
#4  October 02, 2008, 11:57:30 pm
  • **
  • Eh, I just live life; what about you?
The easiest way is to open up your Mugen folder, go into Data and open up your aircredit.cfg file with notepad and then go to [Video Win] and scroll down to this part:

 ;DirectX mode
 ;Choose from Hardware, Software, Windowed, Overlay, Safe and None
 ;Hardware and Software run in full-screen. Windowed and Overlay
 ;run in a window. The windowed modes require you to set Depth to
 ;whatever color depth you are using for you desktop. The best results
 ;are when you run in 16-bit color. There is no advantage to running
 ;in 32-bit color. If Hardware, Software and Windowed fail, try Safe.
 ;None uses GDI to draw, so it's very slow. Use None only if
 ;you cannot get anything else to work.
 ;Overlay is not supported by all video cards, but can be faster than
 ;Windowed if it works.
DXmode = Software

change DXmode = Windowed into, DXmode = Windowed
*Hardware works just fine too but still.*

I hope that I got what you were asking there. . .




Check this out, it's an awesome game: Be the Ultimate Ninja! Play Billy Vs. SNAKEMAN today!
Page 1 of 11   Go Up