YesNoOk
avatar

(HD REMAKE) Hadoukens in Alaska (UPDATED) (Read 7250 times)

Started by Ace-Million, December 18, 2013, 07:36:31 pm
Email this topic
View printable version
Share this topic:
Page 2 of 2< 1 2  All   Go Down

Ace-Million

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#21  December 19, 2013, 09:11:24 pm
  • ***
  • www.soundcloud.com/acemillion
dope! :suttrox:

WatsonGrim69

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#22  December 20, 2013, 05:58:28 am
  • ***
  • KISS MY LIPS.......
    • USA
    • grimwatson1@gmail.com
looks like Icelarn from Warzard. Would love this! but unfortunatly, Im still 1.0. This right here is awesome!

guille_n_roll

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#23  December 20, 2013, 09:58:39 am
  • **
  • Mugen Tournaments Organizer
    • Mexico
Well, i finally updated my mugen into 1.1 version, and i've been tested some stages like this:


And it looks soo cool.
But, i tested your stage Hadoukens in Alaska, and this happened:


I don't know why that happened, this is the only one 1.1 stage that went wrong.
I changed the mugen resolution and it was the same thing.

Ace-Million

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#24  December 20, 2013, 02:15:32 pm
  • ***
  • www.soundcloud.com/acemillion
You have to on OPENGL = 1 on you r mugen.cfg

It happens on more stages that require it. Just go to config. Also make sure stagefit = 1 is not on. 
So stagefit = 0
     Posted: December 20, 2013, 02:17:59 pm
WatsonGrim69 said, December 20, 2013, 05:58:28 am
looks like Icelarn from Warzard. Would love this! but unfortunatly, Im still 1.0. This right here is awesome!

thanks man glad you like it. Hopefully one day you come to the dark side of 1.1 lol. These will be waiting

guille_n_roll

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#25  December 20, 2013, 06:02:21 pm
  • **
  • Mugen Tournaments Organizer
    • Mexico
Ace-Million said, December 20, 2013, 02:15:32 pm
You have to on OPENGL = 1 on you r mugen.cfg

It happens on more stages that require it. Just go to config. Also make sure stagefit = 1 is not on. 
So stagefit = 0
Damn, i was hoping the OpenGL was not the problem, but looks like it is.
My pc doesn't support the OpenGL, that's why i must use DirectX or System.

Zerobruno

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#26  December 20, 2013, 06:27:05 pm
  • **
  • A zero to the left
    • Argentina
guille_n_roll said, December 20, 2013, 06:02:21 pm
Ace-Million said, December 20, 2013, 02:15:32 pm
You have to on OPENGL = 1 on you r mugen.cfg

It happens on more stages that require it. Just go to config. Also make sure stagefit = 1 is not on. 
So stagefit = 0
Damn, i was hoping the OpenGL was not the problem, but looks like it is.
My pc doesn't support the OpenGL, that's why i must use DirectX or System.

you have a graphics card dude? any pc low-mid-high end with a graphics card can run open GL

guille_n_roll

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#27  December 20, 2013, 06:43:59 pm
  • **
  • Mugen Tournaments Organizer
    • Mexico
Zerobruno said, December 20, 2013, 06:27:05 pm
guille_n_roll said, December 20, 2013, 06:02:21 pm
Ace-Million said, December 20, 2013, 02:15:32 pm
You have to on OPENGL = 1 on you r mugen.cfg

It happens on more stages that require it. Just go to config. Also make sure stagefit = 1 is not on. 
So stagefit = 0
Damn, i was hoping the OpenGL was not the problem, but looks like it is.
My pc doesn't support the OpenGL, that's why i must use DirectX or System.

you have a graphics card dude? any pc low-mid-high end with a graphics card can run open GL
Unfortunately, my pc is from almost 10 years ago, LOL.
Is fast to run mugen, and i can record videos to youtube in good quality and velocity, but doesn't support the openGL because is too old.

Zerobruno

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#28  December 20, 2013, 07:45:12 pm
  • **
  • A zero to the left
    • Argentina
ten year old pc? well i see no problem on that,other than the fact it doesn't support 1.1b other than that i suppose there's nothing else to say in the matter

except for this XD
no pun intended

guille_n_roll

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#29  December 20, 2013, 08:09:00 pm
  • **
  • Mugen Tournaments Organizer
    • Mexico
Zerobruno said, December 20, 2013, 07:45:12 pm
ten year old pc? well i see no problem on that,other than the fact it doesn't support 1.1b other than that i suppose there's nothing else to say in the matter

except for this XD
no pun intended
LMAO! i feel the same thing.
Well i have a Nvidia Geeforce FX 5200, but for some reasons, doesn't support the OpenGL, so, i was searching for information in google, and i saw that i must download some drivers to make OpenGL works.
I hope it can works with this.

Ace-Million

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#30  December 20, 2013, 08:18:21 pm
  • ***
  • www.soundcloud.com/acemillion
guille_n_roll said, December 20, 2013, 08:09:00 pm
Zerobruno said, December 20, 2013, 07:45:12 pm
ten year old pc? well i see no problem on that,other than the fact it doesn't support 1.1b other than that i suppose there's nothing else to say in the matter

except for this XD
no pun intended
LMAO! i feel the same thing.
Well i have a Nvidia Geeforce FX 5200, but for some reasons, doesn't support the OpenGL, so, i was searching for information in google, and i saw that i must download some drivers to make OpenGL works.
I hope it can works with this.

THAT FACE!!!!!!! LMAO TROLLING IS HARD HERE. SORRY BRO ABOUT THE OPENGL ugh. This stage made me go get a new graphics card! . I couldnt take it no more. Also openGL makes everything run in 60fps atleast all my stages do. Let me know how it goes. Also my graphics card was like $30 usdollars. I think on TigerDirect or one of those site. My bro found it for me.

Zerobruno

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#31  December 20, 2013, 08:29:03 pm
  • **
  • A zero to the left
    • Argentina
Ace-Million said, December 20, 2013, 08:18:21 pm
guille_n_roll said, December 20, 2013, 08:09:00 pm
Zerobruno said, December 20, 2013, 07:45:12 pm
ten year old pc? well i see no problem on that,other than the fact it doesn't support 1.1b other than that i suppose there's nothing else to say in the matter

except for this XD
no pun intended
LMAO! i feel the same thing.
Well i have a Nvidia Geeforce FX 5200, but for some reasons, doesn't support the OpenGL, so, i was searching for information in google, and i saw that i must download some drivers to make OpenGL works.
I hope it can works with this.

THAT FACE!!!!!!! LMAO TROLLING IS HARD HERE. SORRY BRO ABOUT THE OPENGL ugh. This stage made me go get a new graphics card! . I couldnt take it no more. Also openGL makes everything run in 60fps atleast all my stages do. Let me know how it goes. Also my graphics card was like $30 usdollars. I think on TigerDirect or one of those site. My bro found it for me.

funny thing,i wasn't trying to troll,but yeah it's a must have if you want to enjoy 1.1,that,and in some cases,more ram

Ace-Million

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#32  December 20, 2013, 08:32:48 pm
  • ***
  • www.soundcloud.com/acemillion
lol i know may have some new soon Z so have the camera ready.

Zerobruno

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#33  December 20, 2013, 08:35:17 pm
  • **
  • A zero to the left
    • Argentina

guille_n_roll

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#34  December 20, 2013, 09:18:55 pm
  • **
  • Mugen Tournaments Organizer
    • Mexico
Well, i finally installed all the drivers of my graphic card, now i have the OpenGL version 2.1.2, but i still have this problem after trying to run mugen with openGL config:

Error detected.


Clipboard tail:
---------------------------------------------------
M.U.G.E.N ver 1.1.0 Beta 1 P1 (2013.08.11) status log
---------------------------------------------------
Parsing command line...
Command line: D:\programas\mugen-1.1b1\mugen.exe
Parse command line OK
Initializing...
Allocating game variables
Reading configuration file...Setting language "en".
OK
Initializing timer...performance timer enabled...frequency 3200180000...OK
Initializing keyboard...configuring...OK
Initializing input engine...OK
Initializing sound...OK
Initializing BGM...  OK
Initializing graphics...gameCoord 320x240...render mode 2_20...trying 320x240x32 mode 0x0...failed.

Even changing the Resolution screen have the same problem, i don't know if this is because of the OpenGL version if i need an upgraded version of OpenGL

Ace-Million

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#35  December 20, 2013, 09:37:14 pm
  • ***
  • www.soundcloud.com/acemillion
Use your graphics card to check. I think you need atleast 4.0 openGL or 3.9 I dont think its something you can install just (update) as in latest drivers.

MSI Radeon HD 6450 1GB DDR3 PCI Express 2.0 Video Card (Low profile) around $35
comes with 4.0 and 4.1 some of highest out.

domatenboss

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#36  December 20, 2013, 09:47:23 pm
  • **
    • Bulgaria
ms broken heart is awesome man!

Ace-Million

Re: (HD REMAKE) Hadoukens in Alaska (UPDATED)
#37  December 20, 2013, 11:25:08 pm
  • ***
  • www.soundcloud.com/acemillion
Page 2 of 2< 1 2  All   Go Up