YesNoOk
avatar

HitOverride VS ReversalDef (Read 2653 times)

Started by GPEZ (Mugen League Host), January 02, 2015, 01:21:45 PM
Share this topic:
HitOverride VS ReversalDef
#1  January 02, 2015, 01:21:45 PM
  • avatar
  • **
  • Mugen League Host
  • Mugen League Host
    • Malaysia
    • fljyin08020511@gmail.com
    • Skype - fljyin08020511
    • http://www.mugenleague.com/
If a character using a skill with hitoverride controller to hit another one with using the reversaldef controller which ONE will win?
Host of the team, Mugen League, which drive to promote member's quality work.
Re: HitOverride VS ReversalDef
#2  January 02, 2015, 03:01:55 PM
  • ****
  • Target Acquired.
    • Ukraine
    • mugencoder.com
HitOverride and ReversalDef don't really affect each other. The sequence would be more like this:

A = Character with HitOverride attack.
B = Character with ReversalDef.

- A attacks B.
- B's ReversalDef (provided the attributes are right) activates and B goes into a new state. Let's say B's new state is an attack.
- B attacks A.
- A takes the hit and goes to his own new state that could be anything.

See how it would work? There's no real winner per se. The major difference between the two is that HitOverride activates when the player hits A's blue CLSNs and ReversalDef activates when B's red CLSNs are hit by another set of red CLSNs.

-[Все слова это только слова.]-
Re: HitOverride VS ReversalDef
#3  January 02, 2015, 03:29:42 PM
  • avatar
  • **
  • Mugen League Host
  • Mugen League Host
    • Malaysia
    • fljyin08020511@gmail.com
    • Skype - fljyin08020511
    • http://www.mugenleague.com/
thank u, ok then and i want to sure, ignorehitpause if i set more than 1 is that difference with 1 as well as if i set as -1
Host of the team, Mugen League, which drive to promote member's quality work.
Re: HitOverride VS ReversalDef
#4  January 02, 2015, 03:39:51 PM
  • ****
  • Target Acquired.
    • Ukraine
    • mugencoder.com
No problem.

IgnoreHitPause is a boolean value. This means the value can either be "True" or "False." Any number greater than 0 is considered "True." Any number less than 1 is considered "False." The actual number doesn't matter. IgnoreHitPause=1 and IgnoreHitPause=10 are the same thing; both "True." The convention is to use 1 for "True" and 0 for "False."

-[Все слова это только слова.]-
Re: HitOverride VS ReversalDef
#5  January 02, 2015, 03:47:27 PM
  • avatar
  • **
  • Mugen League Host
  • Mugen League Host
    • Malaysia
    • fljyin08020511@gmail.com
    • Skype - fljyin08020511
    • http://www.mugenleague.com/
so fa it is also same as persistent as well?
Host of the team, Mugen League, which drive to promote member's quality work.
Re: HitOverride VS ReversalDef
#6  January 02, 2015, 03:52:07 PM
  • ****
  • Target Acquired.
    • Ukraine
    • mugencoder.com

-[Все слова это только слова.]-
Re: HitOverride VS ReversalDef
#7  January 02, 2015, 04:44:57 PM
  • avatar
  • **
  • Mugen League Host
  • Mugen League Host
    • Malaysia
    • fljyin08020511@gmail.com
    • Skype - fljyin08020511
    • http://www.mugenleague.com/
ok, thx, that should be better now......and my fren, lastly i want to ask that, i think my fren u know that if sometime the helper is successfully reverse or hit by opponent, there sometime will left a ppl look like the character and only will stay at there, and will not disappear, even i set destroyself, still exist, so is that any trigger can be done or any other way?>
Host of the team, Mugen League, which drive to promote member's quality work.
Re: HitOverride VS ReversalDef
#8  January 02, 2015, 05:03:16 PM
  • ****
  • Target Acquired.
    • Ukraine
    • mugencoder.com
Hmm, you mean a clone of the character? Yeah, that's common problem. Basically, the helper ends up going into the root's states and bypasses the helper's code that you have written. In the State -2 of your character, it's possible to add a DestroySelf for helpers using "ishelper(ID)," but it's better to not let it happen at all. XD

Just make sure you have a HitOverride active whenever a helper has blue CLSNs showing.

-[Все слова это только слова.]-
Re: HitOverride VS ReversalDef
#9  January 02, 2015, 06:32:46 PM
  • avatar
  • **
  • Mugen League Host
  • Mugen League Host
    • Malaysia
    • fljyin08020511@gmail.com
    • Skype - fljyin08020511
    • http://www.mugenleague.com/
ok...thank u very very much, so far i have some idea already, thank u very very much
Host of the team, Mugen League, which drive to promote member's quality work.
Re: HitOverride VS ReversalDef
#10  January 02, 2015, 06:36:37 PM
  • ****
  • Target Acquired.
    • Ukraine
    • mugencoder.com
No problem! :)

-[Все слова это только слова.]-
Re: HitOverride VS ReversalDef
#11  January 03, 2015, 05:11:02 PM
  • avatar
  • **
  • Mugen League Host
  • Mugen League Host
    • Malaysia
    • fljyin08020511@gmail.com
    • Skype - fljyin08020511
    • http://www.mugenleague.com/
here i am again>.<...sorry ya...can i know the is this symbol "*" mean multiple while the "%" mean divide
Host of the team, Mugen League, which drive to promote member's quality work.
Re: HitOverride VS ReversalDef
#12  January 04, 2015, 03:51:01 AM
  • ****
  • STOP PUTTING SPACES IN YOUR FILE NAMES
    • Canada
Close but not quite.
The "*" is indeed "multiply"
However "%" is not "divide", divide would be "/"
"%" is "modulo" and works in this way:
x%y

Where "x" and "y" are numbers.
What modulo does is that it will divide the value "x" by "y" and then returns the remainder.

For example:
4%2 = 0 Since there is no remainder.
7%3 = 1 Since the remainder is 1.
99%10 = 9 Since the remainder is 9.
Re: HitOverride VS ReversalDef
#13  January 08, 2015, 12:11:42 PM
  • avatar
  • **
  • Mugen League Host
  • Mugen League Host
    • Malaysia
    • fljyin08020511@gmail.com
    • Skype - fljyin08020511
    • http://www.mugenleague.com/
thank you, really cherish of what u say,and then how about this 1, it seem like such character have the really accurate number in the enemy position determination. is that necessary need to calculate such figure with the word like "Floor" i understand the word "enemynear(fvar(36))" but is that necessary?

Code:
P2BodyDist Y = [-70-floor(6*(EnemyNear(floor(fvar(37))),vel Y)+(6*(6+1)/2)*fvar(30)),0-floor(6*(EnemyNear(floor(fvar(37))),vel Y)+(6*(6+1)/2)*fvar(30))]
Host of the team, Mugen League, which drive to promote member's quality work.
Re: HitOverride VS ReversalDef
#14  April 08, 2021, 08:31:20 AM
  • avatar
  • *
    • Vietnam
thank you, really cherish of what u say,and then how about this 1, it seem like such character have the really accurate number in the enemy position determination. is that necessary need to calculate such figure with the word like "Floor" i understand the word "enemynear(fvar(36))" but is that necessary?

Code:
P2BodyDist Y = [-70-floor(6*(EnemyNear(floor(fvar(37))),vel Y)+(6*(6+1)/2)*fvar(30)),0-floor(6*(EnemyNear(floor(fvar(37))),vel Y)+(6*(6+1)/2)*fvar(30))]

It's totally necessary to put that enemynear on. You just don't want to understand why was that. It's not so hard to explain but I prefer you to understand it for yourself. I know what was that code meaning cause I'm also the AI editor.
------Tremble Mortal and Despair. Doom has come to this world------