The Mugen Fighters Guild - Show content

Re: [GERMAN ONLY] Tu mich ma ne doppelte Currywurst Pommes Mayo geben

January 24, 2024, 01:25:04 pm View in topic context

Posted by HyperCelebi in [GERMAN ONLY] Tu mich ma ne doppelte Currywurst Pommes Mayo geben (Started by Cenobite 53 August 29, 2007, 01:28:00 am
Board: International

BloodyKeyblade hier. Lebt von euch noch jemand? 10 Monate her ... bissl spät aber frohes Neues. ^^'
MugenGermany offline gegangen? Finde nix dazu ...

Need help with helper selector

November 17, 2018, 04:38:55 am View in topic context

Posted by HyperCelebi in Need help with helper selector (Started by HyperCelebi November 17, 2018, 04:38:55 am
Board: M.U.G.E.N Configuration Help

The character I need help with is Gardevoir by Ðshiznetz, edited by Kater15.
You can see it in this video:

https://www.youtube.com/watch?v=0nFkcQqb7R0

In the beginning of the round, Gardevoir gets a helper selector, with every helper showing one button (weak punch, strong punch, weak kick and strong kick). Whichever Button I hold, it chooses it's helper randomly. Also the time window is only a few ticks long, you cannot choose it manually.

The character has a file in it called "helperselect.cns". The code is the following:

Spoiler, click to toggle visibilty

Code:

;----------special thanks to kods tutorial-------

[Statedef 10100]
ctrl = 1
anim = 899 ;This Anim SHOULD BE BLANK
velset = 0,0

[State 900, VarSet]
type = ParentVarSet
trigger1 = Time = 0
var(40) = 1

[State 900, Explod]
type = Explod
trigger1 = Time = 10
Anim = 10100 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ID = 900
sprpriority = 3
scale=.5,.5

[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10101 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ontop = 1
ID = 900
scale=.5,.5



[State 900, Explod]
type = Explod
trigger1 = Time = 58
Anim = 10102 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ID = 900
scale=.5,.5
sprpriority = 4



[State 900, ChangeState]
type = ChangeState
trigger1 = parent,command = "x" || parent,var(57) = 1
trigger1 = time > 10
value = 10101


[State 900, ChangeState]
type = ChangeState
trigger1 = parent,command = "y" || parent,var(57) = 2
trigger1 = time > 10
value = 10102


[State 900, ChangeState]
type = ChangeState
trigger1 = parent,command = "a" || parent,var(57) = 3
trigger1 = time > 10
value = 10103


[State 900, ChangeState]
type = ChangeState
trigger1 = parent,command = "b"
trigger1 = time > 10
value = 10104

[State 900, ChangeState]
type = ChangeState
trigger1 = parent,command = "z"
trigger1 = time > 10
value = 10104

[State 900, ChangeState]
type = ChangeState
trigger1 = parent,command = "c"
trigger1 = time > 10
value = 10104

[State 900, ChangeState]
type = ChangeState
trigger1 = roundstate > 1
trigger1 = time > 10
value = 10104


[State 900, PlaySnd]
type = PlaySnd
trigger1 = roundstate > 1
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"
value = 99,0
volume = 255

[State 900, RemoveExplod]
type = RemoveExplod
trigger1 = roundstate > 1
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"
ID = 900



[State 900, DestroySelf]
type = DestroySelf
trigger1 = roundstate > 1
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"

;---------------------------
[Statedef 10101]
ctrl = 1
anim = 899 ;This Anim SHOULD BE BLANK
velset = 0,0

[State 900, VarSet]
type = ParentVarSet
trigger1 = Time = 0
var(40) = 1

[State 0, Sneasel]
type = ParentVarSet
trigger1 = parent,command = "x" || parent,var(57) = 1
var(40) = 6


[State 0, VarSet]
type = VarSet
trigger1 = time=0
v = 10
value = 1

[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10103 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ID = 901
sprpriority = 3
scale=.5,.5

[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10101 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ontop = 1
ID = 901
scale=.5,.5
removetime=  25



[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10102 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ID = 901
scale=.5,.5
sprpriority = 4
removetime=  25

[State 900, PlaySnd]
type = PlaySnd
trigger1 = roundstate > 1 || parent,var(57) = [1,3]
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"
value = 99,0
volume = 255

[State 900, RemoveExplod]
type = RemoveExplod
trigger1 = roundstate > 1 || parent,var(57) = [1,3]
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"
ID = 900

[State 900, DestroySelf]
type = DestroySelf
trigger1 = roundstate > 1 || parent,var(57) = [1,3]
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"

;---------------------------
[Statedef 10102]
ctrl = 1
anim = 899 ;This Anim SHOULD BE BLANK
velset = 0,0

[State 900, VarSet]
type = ParentVarSet
trigger1 = Time = 0
var(40) = 1

[State 0, Sneasel]
type = ParentVarSet
trigger1 = parent,command = "y" || parent,var(57) = 2
var(40) = 1


[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10104 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ID = 902
sprpriority = 3
scale=.5,.5

[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10101 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ontop = 1
ID = 902
scale=.5,.5
removetime=  25



[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10102 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ID = 902
scale=.5,.5
sprpriority = 4
removetime=  25

[State 900, PlaySnd]
type = PlaySnd
trigger1 = roundstate > 1 || parent,var(57) = [1,3]
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"
value = 99,0
volume = 255

[State 900, RemoveExplod]
type = RemoveExplod
trigger1 = roundstate > 1 || parent,var(57) = [1,3]
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"
ID = 900

[State 900, DestroySelf]
type = DestroySelf
trigger1 = roundstate > 1 || parent,var(57) = [1,3]
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"

;---------------------------
[Statedef 10103]
ctrl = 1
anim = 899 ;This Anim SHOULD BE BLANK
velset = 0,0

[State 900, VarSet]
type = ParentVarSet
trigger1 = Time = 0
var(40) = 1

[State 0, Sneasel]
type = ParentVarSet
trigger1 = parent,command = "a" || parent,var(57) = 3
var(40) = 2


[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10105 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ID = 903
sprpriority = 3
scale=.5,.5

[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10101 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ontop = 1
ID = 903
scale=.5,.5
removetime=  25



[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10102 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ID = 903
scale=.5,.5
sprpriority = 4
removetime=  25

[State 900, PlaySnd]
type = PlaySnd
trigger1 = roundstate > 1 || parent,var(57) = [1,3]
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"
value = 99,0
volume = 255

[State 900, RemoveExplod]
type = RemoveExplod
trigger1 = roundstate > 1 || parent,var(57) = [1,3]
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"
ID = 900

[State 900, DestroySelf]
type = DestroySelf
trigger1 = roundstate > 1 || parent,var(57) = [1,3]
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"

;---------------------------
[Statedef 10104]
ctrl = 1
anim = 899 ;This Anim SHOULD BE BLANK
velset = 0,0

[State 0, PowerAdd]
type = PowerAdd
trigger1 = time=0
value = 1000


[State 900, VarSet]
type = ParentVarSet
trigger1 = Time = 0
var(40) = 3

[State 0, Sneasel]
type = ParentVarSet
trigger1 = parent,command = "b"
var(40)=3

[State 0, Sneasel]
type = ParentVarSet
trigger1 = parent,command = "z"
var(40)=4

[State 0, Sneasel]
type = ParentVarSet
trigger1 = parent,command = "c"
var(40)=5


[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10106 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ID = 904
sprpriority = 3
scale=.5,.5

[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10101 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ontop = 1
ID = 904
scale=.5,.5
removetime=  25



[State 900, Explod]
type = Explod
trigger1 = Time = 0
Anim = 10102 ;Choose the anim for the groove (see below image to know what to set it to)
pos = Ifelse(Teamside = 1,-55, 55),0 ;The position of the groove,change it according to where you want to put it)
postype = p1
ownpal = 1
bindtime = -1
pausemovetime = -1
supermove = 1
facing = Ifelse(Teamside = 1,1,-1)
ID = 904
scale=.5,.5
sprpriority = 4
removetime=  25



[State 900, PlaySnd]
type = PlaySnd
trigger1 = roundstate > 1
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"
value = 99,0
volume = 255

[State 900, RemoveExplod]
type = RemoveExplod
trigger1 = roundstate > 1
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"
ID = 900

[State 900, DestroySelf]
type = DestroySelf
trigger1 = roundstate > 1
trigger2 = parent,command = "a" || parent,command = "b" || parent,command = "c" || parent,command = "x" || parent,command = "y" || parent,command = "z"

I'm no coder so I don't understand this correctly, but I think that this is coded like you should press and/or hold a specific button in the beginning of the round to choose the helper you want.
But it doesn't work, no matter which button I press, the helper chooses itself randomly.
Any help would be appreciated.

Stage Request

October 17, 2018, 10:15:36 pm View in topic context

Posted by HyperCelebi in Stage Request (Started by HyperCelebi October 17, 2018, 10:15:36 pm
Board: Requests

I am searching Sunset Bridge by Infinite. Anyone got it? The Sendspace Link is offline

Re: Does this thing exist?/who is the author?/etc. thread.

October 14, 2018, 11:14:51 pm View in topic context

Posted by HyperCelebi in Does this thing exist?/who is the author?/etc. thread. (Started by Messatsu August 26, 2007, 08:29:40 pm
Board: Requests

hi-yo said, October 08, 2018, 12:55:16 am

HyperCelebi said, October 01, 2018, 03:04:25 am
Unable to find this stage:

I tried to search the net for power dvd stage but doesn't give me any signs of the stage lol

It's in mulambo's "NONSENSE STAGE PACK #1": http://emanuelepepi.altervista.org/

Thank you very much

Re: Does this thing exist?/who is the author?/etc. thread.

October 01, 2018, 03:04:25 am View in topic context

Posted by HyperCelebi in Does this thing exist?/who is the author?/etc. thread. (Started by Messatsu August 26, 2007, 08:29:40 pm
Board: Requests

Unable to find this stage:

I tried to search the net for power dvd stage but doesn't give me any signs of the stage lol

Re: What's this? (Hitboxes)

August 06, 2018, 07:25:00 pm View in topic context

Posted by HyperCelebi in What's this? (Hitboxes) (Started by HyperCelebi August 06, 2018, 02:55:52 pm
Board: M.U.G.E.N Development Help

IHATEMYNAME said, August 06, 2018, 03:32:55 pm

Those light green colored boxes are not glitched, the "Nothitby" state did it. And by that, you won't be able to attack him until it turns back to blue.

The problem is that the "nothitby" stays for the rest of the round after Piccolo got hit by mentioned attack.
I meant to ask, how I can fix the coding, did the Author forget to put a changestate somewhere or what is causing this?
I am no coder so that's why I'm asking.

And sorry besides, I may not have stated correctly what I wanted to ask.

PlasmoidThunder said, August 06, 2018, 03:29:50 pm

You're correct in saying light blue/cyan denotes invulnerability. It's possible Goku Black put Piccolo into a custom state which grants Piccolo invulnerability in order to prevent him from being hit out of it, though if this is persisting past the attack, then it's possible Goku Black doesn't specify when to end the invulnerability.

So, I'd need to look which state the attack is, which is causing the problem, and look for a "nothitby" state?

What's this? (Hitboxes)

August 06, 2018, 02:55:52 pm View in topic context

Posted by HyperCelebi in What's this? (Hitboxes) (Started by HyperCelebi August 06, 2018, 02:55:52 pm
Board: M.U.G.E.N Development Help

So, in Mugen 1.0, I watched a fight between Goku Black by Heal the World and Piccolo by kenshiro99.
When Piccolo gets hit by a certain attack from Goku Black (I don't know which since I don't play him myself), which looks like some sort of combination attack with a flight and sprint, his blue collision boxes turn light green-ish in colour. When this occurs, he seems invincible / not hittable.
What's this kind of bug? I also noticed this sometimes with KH2 Final Mix Sora by Ichisennen/ZXtales23, but it occured randomly fighting varying opponents. Here's a screenshot of what I mean:

Spoiler, click to toggle visibilty

It seems that Piccolo tends to keep his invulnerability from landing on the ground from the attack:

Spoiler, click to toggle visibilty

Hope you guys can help me out!

Re: Does this thing exist?/who is the author?/etc. thread.

November 28, 2017, 04:00:23 am View in topic context

Posted by HyperCelebi in Does this thing exist?/who is the author?/etc. thread. (Started by Messatsu August 26, 2007, 08:29:40 pm
Board: Requests

I'm looking for a Jax Briggs with MK3 / UMK3 / MKT Sprites but not ripped / converted from MKP.

I know Omegapsycho had an MK2 one but I'm looking for an MK3 one.

Re: Does this thing exist?/who is the author?/etc. thread.

October 09, 2017, 11:03:44 am View in topic context

Posted by HyperCelebi in Does this thing exist?/who is the author?/etc. thread. (Started by Messatsu August 26, 2007, 08:29:40 pm
Board: Requests

I'm looking for a MVC Styled Tessa/Tabasa from Red Earth that works in Mugen 1.0.
I know there is Neo Tabasa made by ryokucha, but she doesn't work in Mugen 1.0.

Help with a character (Mugen 1.0)

August 31, 2017, 04:42:01 am View in topic context

Posted by HyperCelebi in Help with a character (Mugen 1.0) (Started by HyperCelebi August 31, 2017, 04:42:01 am
Board: M.U.G.E.N Configuration Help

I got a problem with an MVC Edited Rorschach by BetoSSJ4, original character by SeanAltly.
After the VS Screen came up and the fight should begin, I get this error message:

Before this error, I got one saying "Error in Statdef 190", which was the intro decider.
After I commented out the Statedef 190, I got that error.

If Mugen would tell me where it stops in the state or where the error is, I could fix it by myself, but the engine doesn't tell me where to look in the state. I looked into the CNS file and apparently it's Rorschach's Journal intro, but I can't figure out what's wrong with it since I'm not all that into character coding.

Any ideas how to fix this? You can find the character on Mugen Archive in the MVC Arrange section, I just don't know if I'm allowed to post links here.

Note: This character has two .def files, I tried both, but they're pretty much the same, just with one having BetoSSJ4 as additional author.

Posted: September 03, 2017, 08:31:36 am
Nvm, fixed it by myself.

Mugen doesn't like the "versiondate" in a character's .def file to be seperated by slashes ( / ), had to change them to commas.

Re: Does this thing exist?/who is the author?/etc. thread.

August 30, 2017, 05:01:02 am View in topic context

Posted by HyperCelebi in Does this thing exist?/who is the author?/etc. thread. (Started by Messatsu August 26, 2007, 08:29:40 pm
Board: Requests

Is there any decent 6-Button styled version of Colossus from the X-Men?
Same question goes for such an Iceman from the X-Men ... these from the Wikia only have like 2 Hypers and Kong's version is a bit too buggy ...
I'd love to have them at least one Lv1, Lv2 and Lv3 Hyper and a fairly decent AI (see P.O.T.S.).

I also would like to know which one would be the best 6-Button styled Spiderman available at this time (in terms of AI, gameplay and movepool).

Not important if MvC or CvS style, but they should have a 6-button gameplay.

Requesting Stage

August 07, 2017, 12:57:21 am View in topic context

Posted by HyperCelebi in Requesting Stage (Started by HyperCelebi August 07, 2017, 12:57:21 am
Board: Requests

There is a stage called "Mothership" by EXShadow. I've read that it's file size is pretty big but it also looks really nice.
Since I also found out by googleing that he puts down his works because he retired from Mugen and I only find like 80% of his stages online, I thought a request would be the best choice now.

Does someone have this stage who would share it?

Thanks for any answer in advance.

Re: [REQUEST] Super Smash Flash 2 Sprite Rips

July 30, 2017, 12:25:01 am View in topic context

Posted by HyperCelebi in [REQUEST] Super Smash Flash 2 Sprite Rips (Started by TrinitroRoy February 05, 2013, 05:57:10 pm
Board: Development Resources

*push*

Link is broken. Does someone still the archives? Specifically, I need the Dankey Kang sprites.

Re: SvK/Infinite Style Dragon Claw

January 12, 2017, 07:46:19 am View in topic context

Posted by HyperCelebi in SvK/Infinite Style Dragon Claw (Started by Kireishito January 04, 2017, 03:48:18 pm
Board: Projects

2OS said, January 11, 2017, 09:35:13 am

i think it's obnoxious that you're converting something original to this stupendously fucking overrated style but i nonetheless applaud your effort.

Stupendously overrated? Sorry, no offense, just wondering why you say that. Don't get that wrong please.
In my opinion Infinite's SvK style is great and fun to play, though it's nothing special.
I just like the idea of 6-button MvC style with CvS elements like Parry, Dodge Roll and Power Charge.

Kireishito said, January 05, 2017, 03:18:02 am

Well, I'll keep working on it while his family don't reply until I get some sort of feedback.

I'm also glad to read that. Sure, Dragon Claw on it's own has a unique fighting style but for example, I keep converting characters I download for my big roster Mugen to the SvK Style as well, but Dragon Claw is such a complicated one.
Very happy to see that someone is going to make him in Infinite's SvK style.
Good luck with that.

Requesting Elysian Tail Sprites (Clean)

June 11, 2016, 11:23:43 pm View in topic context

Posted by HyperCelebi in Requesting Elysian Tail Sprites (Clean) (Started by HyperCelebi June 11, 2016, 11:23:43 pm
Board: Development Resources

Does anyone have "clean" Elysian Tail Sprites? Only really interested in Dust and Fidget, but Fuse would be great too.
I know there are sprites from An Elysian Tail on Spriter's Resource. But when I turn them transpearent this happens:

Spoiler, click to toggle visibilty

I know that this comes from blurring ingame and other stuff. That's why I request "clean" sprites (without the white outlines ...)

If anyone could inform me here that no one have these sprites to share then I can also close this thread and do the whole work on my own.
But since I've read that sprites can be requested in this board, I think it's worth a try.

Re: Requesting Patches / Chars / Edits by R@CE 45 and Mr Infinite

June 09, 2016, 03:42:27 am View in topic context

Posted by HyperCelebi in Requesting Patches / Chars / Edits by R@CE 45 and Mr Infinite (Started by HyperCelebi June 08, 2016, 06:50:50 am
Board: Requests

Thanks so far

First post updated.

Requesting Patches / Chars / Edits by R@CE 45 and Mr Infinite

June 08, 2016, 06:50:50 am View in topic context

Posted by HyperCelebi in Requesting Patches / Chars / Edits by R@CE 45 and Mr Infinite (Started by HyperCelebi June 08, 2016, 06:50:50 am
Board: Requests

I'm looking for some patches/edits and/or chars.

~~MvC / Infinite Geese Howard (link broken):~~

Spoiler, click to toggle visibilty

R@CE 45's MvC Patch for N64Mario's Vega (offline):

Spoiler, click to toggle visibilty

~~Infinite Vega (didn't see a link even not in first post and it isn't on Infinite's Fighting Forum Website):~~

Spoiler, click to toggle visibilty

~~Infinite Balrog (didn't see a link even not in first post and it isn't on Infinite's Fighting Forum Website and second link below is broken):~~

Spoiler, click to toggle visibilty

Re: Battle Arena Toshinden 3 Characters - Sprite references?

December 28, 2015, 08:27:32 pm View in topic context

Posted by HyperCelebi in Battle Arena Toshinden 3 Characters - Sprite references? (Started by HyperCelebi December 02, 2015, 08:41:51 am
Board: Off-Topic Help

Captain Papyrus said, December 22, 2015, 01:07:44 pm

After seeing parts of the Battle Arena Toshinden 3 manga, I must say that Abel has many visual similarities with Dio Brando from JoJo's Bizarre Adventure.
And thankfully, JoJo's Bizarre Adventure does have a 2D fighting game. Made by Capcom even. Might want to check, although I'm not a big Toshinden expert.

I added it to my list, thank you for that. I can work with these.

Re: Battle Arena Toshinden 3 Characters - Sprite references?

December 14, 2015, 02:24:40 am View in topic context

Posted by HyperCelebi in Battle Arena Toshinden 3 Characters - Sprite references? (Started by HyperCelebi December 02, 2015, 08:41:51 am
Board: Off-Topic Help

Runaway Melv said, December 04, 2015, 04:55:30 pm

if'n you're too busy, i can help with that

also i've realized a couple of days that Condor from breakers revenge could potentially be a good base for Tau, they have similar outfits and builds

I just looked at him. Really, better base than T-Hawk, thanks. I think I can work with that.

And yeah, any help would be really appreciated, thank you for the offer.

For the other characters ... since I can't find that much time for Mugen at the moment bacause of Christmas Eve coming closer everyday and getting preperations done for that, this video has to be enough:

Spoiler, click to toggle visibilty

The guy who uploaded this one also did a video about the "Soul Bomb" Moves of the characters, but it is really unimportant for their "look", because I would like to use the standard costumes and they almost always use them as Player 1 in this video. At least when they show the first move of themselves.

I hope this helps you guys. Since almost everyone of you probably knows more characters from Fighting Games than me, it is better to ask I think.

EDIT: (15.12.2015)
Oh, one more thing Runaway Melv. I've just found a thread on my search for bases for the characters.

http://mugenguild.com/forum/topics/layla-and-tsugumi-sakuraka-138076.0.html

Do you still have these two characters? Can't seem to find them on this japanese blog.
Tsugumi might be good for some character I can't imagine at this point, I'm just interested in her, but more important is Layla, since she wears tonfas as weapons and Tracy and Rachael both use them as weapons.
Do you still have them both? I would appreciate your help.

Posted: December 18, 2015, 10:42:27 am
Sorry for double-posting, but I only want to "update" this thread.

Now I've found a few characters as good bases but not all I want to make. First, I'm doing only the stance for each of the characters I want to sprite.
I'm gonna update that in first post when I'm done with the first 1-2 sprites, I will list now which characters of the game I chose and if I got a base for them or not.

Eiji Shinjo - Sol Badguy from Guilty Gear
Sho Shinjo - Yukimura Sanada from Samurai Deeper Kyo or Ky Kiske from Guilty Gear
Kayin Amoh - Kaede from The Last Blade
Naru Amoh - ??? (a little girl with pigtails wearing a Katana)
Ellis - Zantetsu from The Last Blade
Gaia - Zack from Dragoon Might (Weapon), Zankuro from Samurai Shodown for the hair and Yumeji from Samurai Shodown for the stance
David - Iori Yagami (Hair) and Ryo Sakazaki
Tracy and Rachael - Layla from Dragoon Might; Rob Vincent from Knuckle Heads or Maki Genryusai from Final Fight
Nagisa - Yuya Shiina from Samurai Deeper Kyo and Detective Garret Laurel from SHADEs of Manhattan 2
Rungo Iron - Juzo Kanzaki from The Last Blade
Bayhou and Cuiling - Choi Bounge from The King of Fighters series and Vega (Claw) for Fo Fai's Claws (Bayhou)
Atahua - ??? (a young native american with tribesman twin blowguns)
Tau - Condor Heads from Breakers Series (thanks to Runaway Melv)
Adam - Maybe War Machine from MvC2 or Iron Man, not sure at the moment (He's an orange robot with a laser cannon gun, not attached to him)
Ten Count - Moonwalker for the color scheme (Michael Jackson clone) ... Charlotte from Samurai Shodown for the Rapier ... but no idea for the stance, since it's like Michael Jackson ... just maybe Lee Recca from The Last Blade
Judgement - Thirteen from SHADEs of Manhattan 2
Chaos - Kyoshiro from Samurai Shodown (stance) and Testament from Guilty Gear for the scythe
Vermilion - ??? (skinny guy with glasses, wearing two guns, a sawn-off one handed shotgun and a revolver and wearing a black suit with a white vest underneath)
Abel - Ken Masters from Street Fighter series and Dio Brando from JoJo's Bizarre Adventure (thanks to Captain Papyrus, these sprites really could be a good base for his body)
Veil - ??? (the penultimate character shown in the video I posted before)

I will update first post when some sprites are done.

And like always: suggestions for the missing character bases would be appreciated.

Re: Battle Arena Toshinden 3 Characters - Sprite references?

December 02, 2015, 09:30:43 pm View in topic context

Posted by HyperCelebi in Battle Arena Toshinden 3 Characters - Sprite references? (Started by HyperCelebi December 02, 2015, 08:41:51 am
Board: Off-Topic Help

Cyanide said, December 02, 2015, 09:22:04 am

TBH posting screenshots of each character (just a single screen) would be more beneficial than names. Most of them have weapons, weapons aren't THAT common in the ripped fighting games, so you'd have to edit them in anyway. So we need to work out who the best base is. I could look up screenshots myself but it would make more sense if you posted them.

For example, golden zabel from darkstalkers wields a chainsaw. But he's a very zombie looking zombie and absolutely won't suit for the sprite set you have, you would be better with a double handed sword regular character and then editing the moves into a chainsaw instead.

Yeah, you're right, I just made up that post at early morning and was too tired to take screenshots from the game.
I will do that later when I get the time to and update first post. Or is it better to put the screens into a new post? I don't know, I'm not that much active in online forums.

And yes, when I said "sprite reference" I meant using another character as base. Sorry if that was wrong, English isn't my native language.

Like said, I will post screens (or maybe video) later then.

Profile Info

Show content

HyperCelebi

Messages by HyperCelebi

Re: [GERMAN ONLY] Tu mich ma ne doppelte Currywurst Pommes Mayo geben

Need help with helper selector

Stage Request

Re: Does this thing exist?/who is the author?/etc. thread.

Re: Does this thing exist?/who is the author?/etc. thread.

Re: What's this? (Hitboxes)

What's this? (Hitboxes)

Re: Does this thing exist?/who is the author?/etc. thread.

Re: Does this thing exist?/who is the author?/etc. thread.

Help with a character (Mugen 1.0)

Re: Does this thing exist?/who is the author?/etc. thread.

Requesting Stage

Re: [REQUEST] Super Smash Flash 2 Sprite Rips

Re: SvK/Infinite Style Dragon Claw

Requesting Elysian Tail Sprites (Clean)

Re: Requesting Patches / Chars / Edits by R@CE 45 and Mr Infinite

Requesting Patches / Chars / Edits by R@CE 45 and Mr Infinite

Re: Battle Arena Toshinden 3 Characters - Sprite references?

Re: Battle Arena Toshinden 3 Characters - Sprite references?

Re: Battle Arena Toshinden 3 Characters - Sprite references?