News:

MFG's Character of the Month: October 2026 Voting

Main Menu

Here's the plan, man

Started by RKade, May 15, 2009, 08:33:46 PM

Previous topic - Next topic

RKade

Step one: Turn a jpeg of a white piece of paper into a test stage

What I want to do is make a stick fighter type game. The first thing I need is a doable simple background for my mostly transparent characters. I've got an image and I tried to do that jigsaw thing in the tutorial but my eye is not up to all that zooming in. I don't want fancy because everyone does fancy and I just can't do that.

After I have the background, what should I start working on? If I could get someone who would care to dedicate some time to helping my poor newb butt out, I'd be greatly appreciative. I could even pay for the time if there was enough of it and it worked.

My plan is to make stick figure representatives of all the groovy characters of Capcom/SNK fame and use a simple consistant engine (KOF2k2 if I can swing it with C for MAX mode and Z for Taunt) so it looks professional and plays efficiently. Maybe make a story, I dunno. I'd like to flesh it out as much as possible. Show that hi res does not make a game.

Anyway, first off, I need to get this sucker off the ground.

Byakko

Take KFM. Do a spriteswap. Change some values in his code. Try and test and see what it does. Get used to the sctrls and the triggers.
Then think about making a full game.
Each time you have a specific problem, come and ask. If you don't know how to swap sprites, ask. If you don't know what a sctrl is, ask.
Do things one by one.
If I struggled to the end of my determination, to the end of my way of life with my followers, if the result is ruin, then this ruin is inevitable. Grieve. Shed tears. But you cannot regret.

RKade

Ok. How do I make THIS into a viable "test"/first background? Might as well start there.

XGargoyle

0. read a tutorial on how to do stages/backgrounds (there is a tutorial in the docs folder in your mugen)
1. convert the image to a 256 color PCX file
2. add the pcx to the a SFF file (use MCM, Fighter Factory, Sprmaker, or any other tool that lets you create sff files)\
3. edit the DEF file with notepad
4. Play it in mugen


XGargoyle: Battle posing since 1979
http://xgargoyle.mgbr.net
http://www.pandorabots.com/pandora/talk?botid=e71c0d43fe35093a  <-- Please click that link
http://paypal.me/XGargoyle  <-- Donations welcome!

RKade

Wait... *looks in MUGEN folder*

CUSS! Well the one here on the forum just confused me. Let's see what I can make out of that. Be right back and sorry for being a newb.

RKade

Sorry for the double post but yoink and yoink


http://www.4shared.com/file/105656500/acbf6aae/Paper_stages.html

I think I screwed up somewhere plus I want these to be able to scroll left and right for a LOOOOOONG way because, well, it's an idea I've had for a long time about getting stuck in the wall. Is there a looping option because that'd be great. Anyway, progress!

Any thoughts?

XGargoyle

adjust the stage bounds and use the tile option for "looping" the sprite


XGargoyle: Battle posing since 1979
http://xgargoyle.mgbr.net
http://www.pandorabots.com/pandora/talk?botid=e71c0d43fe35093a  <-- Please click that link
http://paypal.me/XGargoyle  <-- Donations welcome!

RKade

Which bound? There are 3 sets of them. I can crop a loop though. What kind of numbers should I put in?

boundleft/right 90
left/rightbound 1000
screenleft/right 10

Byakko

#8
I don't know much about stages, but I can tell you that the simplest and most straightforward way is to test each of them one by one. If something break you only have to change it back :P you just have to mind that it can be a combination too. Otherwise the default stage should have information and comments about it ?
Or I have no idea what I'm talking about anyway so you're better off listening to someone who knows, like down here.
||
V
If I struggled to the end of my determination, to the end of my way of life with my followers, if the result is ruin, then this ruin is inevitable. Grieve. Shed tears. But you cannot regret.

O Ilusionista

QuoteWhich bound? There are 3 sets of them. I can crop a loop though. What kind of numbers should I put in?

Keep in mind that mugen screen has 320x240 pixels.

So, about the bound  left and right

(your image width - mugen screen width) / 2
in your case: (800-320)/2 = 240 on boundleft /right

To calculate the  bound high, its the same, just replace the width for height.


RKade

#10
Wait, you lost me now. I thought mugen had 640x480.

My image sizes are both 8wx6h. I'd like to be able to give the stick folks a blank ton of room to run, jump, and have fun in. Have some of them do that dragon ball flying blank and have some of them do that more realistic grounded game (with an anti-air projectile or something). Plus super huge stick figure bosses. :)

so 8w-320=480/2=240w
6h-240=360/2=180h

What are the other 2 defs for? (left/rightbound 1000 and screenleft/right 10)

And where should I be positioning my pcx in my sff? Dead center? Dead center where the "floor" is?

Is there an upload site? I'd prefer to zip and post that so you experts could test it, you know?

Let me past my def since they're both the same


[Info]
name = "White Paper"
author = "RKade"
[Camera]
startx = 0
starty = 0
boundleft = -240
boundright = 240
boundhigh = -180
boundlow = 0
verticalfollow = .0
floortension = 0
tension = 50
[PlayerInfo]
p1startx = -70
p1starty = 0
p1startz = 0
p1facing = 1
p2startx = 70
p2starty = 0
p2startz = 0
p2facing = -1
leftbound  = -1000
rightbound =  1000
topbound  =  0
botbound  =  0
[Scaling]
topz     = 0
botz     = 50
topscale = 1
botscale = 1.2
[Bound]
screenleft = 10
screenright = 10
[StageInfo]
zoffset = 201
autoturn = 1
resetBG = 1
hires = 1
[Shadow]
intensity = 0
color = 0,0,0
yscale = 0
fade.range = 0,0
intensity = 0
[Music]
bgmusic =
bgvolume = 0
[BGdef]
spr = white.sff
debugbg = 0
[BG 0]
type  = normal
spriteno = 0, 0
layerno = 0
start = 0, 0
delta = 1, 1
trans = none
mask  = 0
tile  = 0, 0
tilespacing = 0,0
window = 0,0, 639, 479


Hmm... Took this after I altered

boundleft = -240
boundright = 240
boundhigh = -180

O Ilusionista

put the axis on its horizontal center

RKade

Ok, so I was doing it right (I had a fun time when it was originally uploaded and half the background was gone). I turned on tiling and that fixed it. Now for some fine tuning.

I want the background to be... flat. When I move, I want it to move with me. When I jump, I want it to jump with me. One for one, you know? As it is, when I jump or move, the background... drags?

O Ilusionista

here

delta = 1, 1

change to 0,0

but it will be very weird to see...

RKade

You were right about that. Hmmm.... I want just the horizontal to move, not the vertical so the line will remain the same. How would I go about increasing the field of play to something more appropriate? I know, eventually, I'll have to crop some enders on the sides (to make it look fluid) and make the top about 1200-2400px but I'd like my stable to run quite a gamut of fighters since they're all going to be stick figures :) The ideal is around... if a ryu is 10x10 and a fireball is a 2.5x2.5, I'd want the field to be a 25x25 or a 50x50. Big f'n tactical suckers, you know? Something else to make up for all the crappy visuals (although *I* think the crappy visuals and INTENTIONALLY crappy sound will be part of the charm. I guess you'd call it a 2d arena fighter)

I assume export the image as a PCX, edit in photoshop, reimport it and delete the old one?

edit: I added you on msn. BRyan8583@hotmail.com Thanks for your help, person. :)

RKade

After fiddling around, Delta 2,2 does what I want it to with the background. As for the field of play...