News:

MFG's Character of the Month: October 2026 Voting

Main Menu

Fighter Factory Development Thread

Started by VirtuallTek, September 04, 2010, 04:06:44 AM

Previous topic - Next topic

VirtuallTek

Beta 5 in the hand of 8 private Beta testers.
The other two don't send me news a long time :P

[]s

Riptide

Does this allow you to rearrange pallets like you do in gimp.

Cyanide

This version is a major step up from the last one. Until other huge changes occur this is going to be the definitive editor.

It's got enough that if you want to keep it simple you CAN keep it simple. But there's additional timesavers all over the place for people who want to work like that.

Very very nice.


In M.U.G.E.N there is no magic button

They say a little knowledge is a dangerous thing, but it's not one half so bad as a lot of ignorance.

Navana

Can't wait for the release. I hope it's as good as others are saying it will turn out to be.

Riptide

well I'm only using gimp for one thing. which is kinda a waste so.

Mr. I

Is it possible to put a function (keyboard shortcut) to comment out code by putting ";" in front of each line. This is in case you want to try something with new velocities or stuff and want to save the old code in case it does not work properly.

Alternatively you could also search for the string "type =" and change the result to "null" for the sections highlighted which could have the same effect.

The former may be easier for the uncommenting of code though.
The double-curse of Blue Beard Baboon lies in these words you see. Read them once, then read them twice and your island is history.

~*Ishida-Uryuu*~

#326
Quote from: Orbinaut on May 29, 2011, 04:01:55 AM
Is it possible to put a function (keyboard shortcut) to comment out code by putting ";" in front of each line. This is in case you want to try something with new velocities or stuff and want to save the old code in case it does not work properly.

Yes, I remember this functionality being in FFU with the "Comment" and "Uncomment" functions in the Right Click menu. What happened to that feature?

Also, we lost the ability to edit the Sctrl's in the right list of the CNS editor? I actually used that. :(

One more thing. The "Apply time to all frames" in the AIR editor doesn't seem to work. Actually I'll continue using this post to report stuff until more replies are posted.

                  ~*The Last Quincy*~         ~Sig by [TempesT]
My MUGEN shit:
MvC2 Tron Bonne, MvC Kim Kaphwan, Barns (Destruction Desire),
and Burai Yamamoto (Arranged)

VirtuallTek

Quote from: Riptide on May 28, 2011, 04:06:42 AM
Does this allow you to rearrange pallets like you do in gimp.
Interesting idea.

Quote from: ~*Ishida-Uryuu*~ on May 29, 2011, 06:55:43 AM
Yes, I remember this functionality being in FFU with the "Comment" and "Uncomment" functions in the Right Click menu. What happened to that feature?
Go to Edit -> Code -> Comment selection or Uncomment selection
Or change the interface preset to Character.

Quote from: ~*Ishida-Uryuu*~ on May 29, 2011, 06:55:43 AM
Also, we lost the ability to edit the Sctrl's in the right list of the CNS editor? I actually used that. :(
For now, yes.

Quote from: ~*Ishida-Uryuu*~ on May 29, 2011, 06:55:43 AM
One more thing. The "Apply time to all frames" in the AIR editor doesn't seem to work. Actually I'll continue using this post to report stuff until more replies are posted.
These functions now are "Apply to all next frames".

[]s

✟pao✟

#328
moving a group of sprite would be lovely
is this possible with checkbox which lock the group
or a new axis for group? :3
★★★★★★
Admin in disguise
Spoiler (click to show)
★9.14.10★

~*Ishida-Uryuu*~

Quote from: VirtuallTek on May 29, 2011, 05:54:02 PM
Quote from: ~*Ishida-Uryuu*~ on May 29, 2011, 06:55:43 AM
Yes, I remember this functionality being in FFU with the "Comment" and "Uncomment" functions in the Right Click menu. What happened to that feature?
Go to Edit -> Code -> Comment selection or Uncomment selection
Or change the interface preset to Character.

I see. :) It would be great to have the right click shortcut back though for added convenience.

Quote
Quote from: ~*Ishida-Uryuu*~ on May 29, 2011, 06:55:43 AM
Also, we lost the ability to edit the Sctrl's in the right list of the CNS editor? I actually used that. :(
For now, yes.

Aww. :( Any chance of getting that back? I used to use it to check what parameters were used in an sctrl quickly instead of having to double click it, seeing what I need, and then having to delete the whole section and messing with the CNS.

Quote
Quote from: ~*Ishida-Uryuu*~ on May 29, 2011, 06:55:43 AM
One more thing. The "Apply time to all frames" in the AIR editor doesn't seem to work. Actually I'll continue using this post to report stuff until more replies are posted.
These functions now are "Apply to all next frames".

[]s

Ah, I see. Got it. :)

Also, I think using the "Save All" function keeps messing up my character's big portrait. >_< It's the first sprite in the SFF and it's not shared palette.

One other thing I noticed is with the sprite organizer (haven't tested this on sounds or animations), when you move an entry up or down, the scrollbar jerks all the way up so whatever you highlighted goes to the bottom, making it hard to see where you're placing the sprite. It would be a lot better if the scrollbar didn't move while you're moving the sprites, unless of course you're moving it past the bottom of the visible list.

                  ~*The Last Quincy*~         ~Sig by [TempesT]
My MUGEN shit:
MvC2 Tron Bonne, MvC Kim Kaphwan, Barns (Destruction Desire),
and Burai Yamamoto (Arranged)

VirtuallTek

QuoteAww. :( Any chance of getting that back? I used to use it to check what parameters were used in an sctrl quickly instead of having to double click it, seeing what I need, and then having to delete the whole section and messing with the CNS.
I will make it  ;)

QuoteAlso, I think using the "Save All" function keeps messing up my character's big portrait. >_< It's the first sprite in the SFF and it's not shared palette.
SFF v1 i presume. Send me the feedback by PM and include more info as possible, including your SFF file. And the testing is private for now, is strange to discuss questions that are specific to this version here.

QuoteOne other thing I noticed is with the sprite organizer (haven't tested this on sounds or animations), when you move an entry up or down, the scrollbar jerks all the way up so whatever you highlighted goes to the bottom, making it hard to see where you're placing the sprite. It would be a lot better if the scrollbar didn't move while you're moving the sprites, unless of course you're moving it past the bottom of the visible list.
Yes, but this is out of my control. I can't force the scroolbar to a fixed position, but i'm trying to reposition if needed.

[]s

VirtuallTek

News

I decided to start the next step of the Fighter Factory's development in the next version. I will continue the private testing to check and discuss new things, and these testers will receive special versions.
When the next version came on, the Release Candidate step wil be started.
It will not be very soon, but not so far.  ;D

Thanks to everyone that use the program and a very special thanks to all beta testers!

✟pao✟

can you enlarge a bit more the screen of offset viewer or just add scrollbars?
★★★★★★
Admin in disguise
Spoiler (click to show)
★9.14.10★

VirtuallTek

The screen size of the FF3 Offset viewer is 640x480, and it uses the char localcoord and scale.

[]s

Rajaa Retired

Better yet, add the option to scale the sprites. =p

Jesuszilla

#335
Actually, something doesn't appear to be right with the scaling. It appears to scale KFM even though he has a scale of 1,1.

It also appears to be doing measurements in 640x480, when KFM's localcoord is 320x240.

VirtuallTek

#336
Quote from: Rajaa on June 20, 2011, 06:03:46 PM
Better yet, add the option to scale the sprites. =p
You have zoom too, but I think it unecessary.

Quote from: Jesuszilla on June 20, 2011, 06:35:40 PM
Actually, something doesn't appear to be right with the scaling. It appears to scale KFM even though he has a scale of 1,1.

It also appears to be doing measurements in 640x480, when KFM's localcoord is 320x240.
Yes, all measurements are in the screen size (640x480) and the calculation is different for WinMugen chars. All chars with localcoord 320x240 will have the x and y scale multiplied by 2. The idea is to reproduce the way Mugen scales the char.

[]s

Jesuszilla

The calculation is actually dependent on the localcoord. Believe me, I've had to use float values for positioning in order to get things to move 1 pixel instead of 2.

Anthem


VirtuallTek

Will be the next version, but has no release date yet.

[]s