Confusing controls

Started by FireFire273, October 16, 2012, 02:18:22 AM

Previous topic - Next topic

FireFire273

What buttons are B, D, and F? Need help

Lil' Hurricane

B = Back
D = Down
F = Forward

Hope this answers your question.

FireFire273

Thanks

     Posted: October 16, 2012, 02:40:00 AM
Which button's "S"?

     Posted: October 16, 2012, 03:01:47 AM
Why do you have to do combos really quick? i keep screwing up

Duke of Corvus

there's no "S" button, keys in CAPITALS, means direction, and keys in lowercase means button, there's a key "s" for start but is lowercase

there are four direction keys (Caps)
F = Forward
B = Back
U = Up
D = Down

and seven keys for buttons (lowercase)
a = a button
b = b button
c = c button
x = x button
y = y button
z = z button
s = start button

you can assign the buttons to your keyboard in the config menu.
Lord Noble Eye of Dezeroff; High Commander of the Reconnaissance Division, Airborne Corps; Fifth Seat in the Murder's Council; and Duke of Corvus

vgma2

You can change command inputs that you find too difficult to pull off, and modify the time the player must input them, in the .cmd of the character.

However, you also need to make sure no other command uses the same input as your newly modified one.

kfm's .cmd has more information about this.

FireFire273

Where in the CMD file of a character?

vgma2

Open the chars folder, you'll see a bunch of folders which will contain characters that you have on your Mugen.

Open up your desired character folder and you'll see a bunch of files (and maybe more folders)

You should see the characters' .cmd file somewhere in there. You can edit it via notepad.

FireFire273

I said where in the .cmd file?

vgma2

Usually at the very top you can see a bunch of commands which might look something like....

Quote from: kfm's .cmd[Command]
name = "TripleKFPalm"
command = ~D, DF, F, D, DF, F, x
time = 20

[Command]
name = "TripleKFPalm" 
command = ~D, DF, F, D, DF, F, y
time = 20

[Command]
name = "SmashKFUpper"
command = ~D, DB, B, D, DB, B, x
time = 20

[Command]
name = "SmashKFUpper"
command = ~D, DB, B, D, DB, B, y
time = 20
If you do not see it immediately, scroll down until you start to see something which resembles it. (It should be pretty near the top.)
Some moves listed in a character's command file however, will not always work or may require certain conditions for it to be executed.

FireFire273

how do i change combinations, cause i find them too complicated to pull off

vgma2

Like I said, read the top of kfm's command file.

Spoiler (click to show)
Quote; The CMD file.
;
; Two parts: 1. Command definition and  2. State entry
; (state entry is after the commands def section)
;
; 1. Command definition
; ---------------------
; Note: The commands are CASE-SENSITIVE, and so are the command names.
; The eight directions are:
;   B, DB, D, DF, F, UF, U, UB     (all CAPS)
;   corresponding to back, down-back, down, downforward, etc.
; The six buttons are:
;   a, b, c, x, y, z               (all lower case)
;   In default key config, abc are are the bottom, and xyz are on the
;   top row. For 2 button characters, we recommend you use a and b.
;   For 6 button characters, use abc for kicks and xyz for punches.
;
; Each [Command] section defines a command that you can use for
; state entry, as well as in the CNS file.
; The command section should look like:
;
;   [Command]
;   name = some_name
;   command = the_command
;   time = time (optional)
;   buffer.time = time (optional)
;
; - some_name
;   A name to give that command. You'll use this name to refer to
;   that command in the state entry, as well as the CNS. It is case-
;   sensitive (QCB_a is NOT the same as Qcb_a or QCB_A).
;
; - command
;   list of buttons or directions, separated by commas. Each of these
;   buttons or directions is referred to as a "symbol".
;   Directions and buttons can be preceded by special characters:
;   slash (/) - means the key must be held down
;          egs. command = /D       ;hold the down direction
;               command = /DB, a   ;hold down-back while you press a
;   tilde (~) - to detect key releases
;          egs. command = ~a       ;release the a button
;               command = ~D, F, a ;release down, press fwd, then a
;          If you want to detect "charge moves", you can specify
;          the time the key must be held down for (in game-ticks)
;          egs. command = ~30a     ;hold a for at least 30 ticks, then release
;   dollar ($) - Direction-only: detect as 4-way
;          egs. command = $D       ;will detect if D, DB or DF is held
;               command = $B       ;will detect if B, DB or UB is held
;   plus (+) - Buttons only: simultaneous press
;          egs. command = a+b      ;press a and b at the same time
;               command = x+y+z    ;press x, y and z at the same time
;   greater-than (>) - means there must be no other keys pressed or released
;                      between the previous and the current symbol.
;          egs. command = a, >~a   ;press a and release it without having hit
;                                  ;or released any other keys in between
;   You can combine the symbols:
;     eg. command = ~30$D, a+b     ;hold D, DB or DF for 30 ticks, release,
;                                  ;then press a and b together
;
;   Note: Successive direction symbols are always expanded in a manner similar
;         to this example:
;           command = F, F
;         is expanded when MUGEN reads it, to become equivalent to:
;           command = F, >~F, >F
;
;   It is recommended that for most "motion" commads, eg. quarter-circle-fwd,
;   you start off with a "release direction". This makes the command easier
;   to do.
;
; - time (optional)
;   Time allowed to do the command, given in game-ticks. The default
;   value for this is set in the [Defaults] section below. A typical
;   value is 15.
;
; - buffer.time (optional)
;   Time that the command will be buffered for. If the command is done
;   successfully, then it will be valid for this time. The simplest
;   case is to set this to 1. That means that the command is valid
;   only in the same tick it is performed. With a higher value, such
;   as 3 or 4, you can get a "looser" feel to the command. The result
;   is that combos can become easier to do because you can perform
;   the command early. Attacks just as you regain control (eg. from
;   getting up) also become easier to do. The side effect of this is
;   that the command is continuously asserted, so it will seem as if
;   you had performed the move rapidly in succession during the valid
;   time. To understand this, try setting buffer.time to 30 and hit
;   a fast attack, such as KFM's light punch.
;   The default value for this is set in the [Defaults] section below.
;   This parameter does not affect hold-only commands (eg. /F). It
;   will be assumed to be 1 for those commands.
;
; If you have two or more commands with the same name, all of them will
; work. You can use it to allow multiple motions for the same move.
;
; Some common commands examples are given below.
;
; [Command] ;Quarter circle forward + x
; name = "QCF_x"
; command = ~D, DF, F, x
;
; [Command] ;Half circle back + a
; name = "HCB_a"
; command = ~F, DF, D, DB, B, a
;
; [Command] ;Two quarter circles forward + y
; name = "2QCF_y"
; command = ~D, DF, F, D, DF, F, y
;
; [Command] ;Tap b rapidly
; name = "5b"
; command = b, b, b, b, b
; time = 30
;
; [Command] ;Charge back, then forward + z
; name = "charge_B_F_z"
; command = ~60$B, F, z
; time = 10
;
; [Command] ;Charge down, then up + c
; name = "charge_D_U_c"
; command = ~60$D, U, c
; time = 10