News:

MFG's Character of the Month: October 2026 Voting

Main Menu

Fighter Factory Development Thread

Started by VirtuallTek, September 04, 2010, 04:06:44 AM

Previous topic - Next topic

O Ilusionista

Quoteand a lot of syntax errors on other chars.

Just avoid to trigger something like "playsnd" wrong becuase the it "should" be written "PlaySnd".

I know that is a standart on some languages, but this is not required (e eu sempre achei isso frescura)

VirtuallTek

#121
QuoteAlso, I think a good idea would be to put FFC somewhere on the site, for people who still work with Winmugen - there are some things I prefer FFC for that FFU just doesn't do as well.
About FFC, I missed part of the source code.
I will update FFU later, with great improvements.

Quote from: .(O). on October 11, 2010, 04:56:20 PM
Quoteand a lot of syntax errors on other chars.

Just avoid to trigger something like "playsnd" wrong becuase the it "should" be written "PlaySnd".

I know that is a standart on some languages, but this is not required (e eu sempre achei isso frescura)
No, the highlighter is case insensitive.
I talk about real syntax errors, like bizarre expressions, some of them are very wrong :D
The only controversy thing that is detected as error, is an invalid parameter in certain state controller, but this is allowed in Mugen, that ignores the invalid parameter.

[]s

Cyanide

The first guy is really just talking about the original installer. When it was off the page we had no method of getting it to people to make use of it when FFU didn't suit. It's been rehosted in a couple of locations and i've still got it on my PC but hosting it officially would be a good plan.

Being unable to update it is fine but leaving it available for those who wish to use it over FFU would be a good solution. The interface is so intuitive.


In M.U.G.E.N there is no magic button

They say a little knowledge is a dangerous thing, but it's not one half so bad as a lot of ignorance.

Bleed

Could there be a way to make the collision boxes take in to consideration sprites of different resolution?

In FFU, I was having some trouble adding collision boxes in the right location for special effects that were higher resolution than the basic sprites.

Maybe a scale setting in the .air editor which is separate for every action, so it will scale the sprites to the size they would show up in mugen, and you can put the collision boxes where they go easily.


What I ended up doing without this option was reloading mugen over and over, while I tweaked the size and location of collision boxes in FFU.  A tiny collision box off to the side would fit in the right place when run in mugen.

Maybe this option is not too difficult to add?

O Ilusionista

QuoteIn FFU, I was having some trouble adding collision boxes in the right location for special effects that were higher resolution than the basic sprites.

this isn't related with FFU, its Mugen related.

Bleed

I don't see how that would be a problem with my suggestion.  Fighter Factory is a tool that facilitates development of mugen content, there is a direct correlation.

The option suggested is something to show the sprites in a different scale within Fighter Factory.  It's like the zoom effect which is already available.

Cyanide

When hi res sprites are scaled by the CNS constants they scale down the clsn boxes as well. Your problem is that you are scaling them via angledraw meaning you have to guess. Fighter Factory shouldn't have to take your code into account with your sprites.

This may be partially solved by 1.1 which allows for air file scaling.


In M.U.G.E.N there is no magic button

They say a little knowledge is a dangerous thing, but it's not one half so bad as a lot of ignorance.

Jmorphman

You could always manually scale the sprites and add them to the sff, and base the CLSN's on that; you would then remove those sprites and use the unscaled versions with the scaled CLSN's.

Bleed

You are right, I just thought of that a minute ago.  What I'm saying has nothing to do with altering the code.  It's just a scale preview, same as using the zoom tool to make the sprites big or small in FF.  Maybe I didn't explain it clear enough.

Basically the collision boxes would stay the default size, nothing happens with that.  Have a zoom for the sprites only, so I can get a "preview" of it inside FF, without having to load the game.  No effect on the code, I would edit that by hand like normal.


Like if I make a helper with a scale of .5,.5

I would go to the action for it and set the preview scale to .5,.5, so I can fit the collision boxes where they go, that's it.

Personification of Swarve

it would be great if there was a way that FF could auto generate anim code so that when people are trying to make things like intros they dont have to slave at their keyboards manually typing in each line for the animation in the .def file

Jesuszilla


Personification of Swarve

Quote from: Jesuszilla on October 17, 2010, 03:25:05 AM
Fighter Factory is not psychic.

Well Duh.

but like wouldnt it be possible to have like an auto code feature like when youve inserted all the sprites into FF maybe it could have an auto generate button because in all honesty the whole anim line is there to your left e.g. X axis Y axis group and image numbers etc.. , so instead of having to keep referring to FF whilst manually typing it it'd be cool to have like an auto generate button, it'd be useful for making other stuff too...

just a suggestion  --; ...

Cybaster


Jango

Quote from: Schone Fraulein on October 17, 2010, 10:07:00 AM
Well Duh.

but like wouldnt it be possible to have like an auto code feature like when youve inserted all the sprites into FF maybe it could have an auto generate button because in all honesty the whole anim line is there to your left e.g. X axis Y axis group and image numbers etc.. , so instead of having to keep referring to FF whilst manually typing it it'd be cool to have like an auto generate button, it'd be useful for making other stuff too...

just a suggestion  --; ...

But then you'd have to go back and fix it all anyway, so what's the friggin' point?

Personification of Swarve

And why would i have to do that? text can break?!







Rajaa Retired

You can make your own animation via fighter factory and press a button for an  auto generated animation code of all sprites from a certain group, already. That's all that's needed, really. You're asking for a shortcut to a shortcut, which, in this case, isn't necessary.

Personification of Swarve

YOU CAN..... woah woah forget i spoke.... could you point it out 2 me please....?  ;P

VirtuallTek

About the original FF UP3 installer, I will put it online.
About the last discussion, seems to be solved. We don't need another button to generate the anim text.  :)

Quote from: ξ Bastard on October 17, 2010, 11:11:51 AM
Quote from: Jesuszilla on October 17, 2010, 03:25:05 AM
Fighter Factory is not psychic.

Just use copy-paste
Quote from: 50 Bit Cent on October 17, 2010, 03:58:39 PM
You can make your own animation via fighter factory and press a button for an  auto generated animation code of all sprites from a certain group, already. That's all that's needed, really. You're asking for a shortcut to a shortcut, which, in this case, isn't necessary.
:sugoi:

[]s

Personification of Swarve

Lol seriously you were right, I never knew that all you gotta do is add the sprites separately then head to the anim section, hit play all listed/of the same group then just open up the .air or the notepad file it generates then copy paste that into your (system.def?) i dunno add them too whatever ass your making  :sugoi:

Forget i spoke, how un-swarve of me lolz.

Toshio Tenma

I was testing a character with localcoord=640x480 and when I did a test play with Fighter Factory, she turned into a giant which means the program still have no support for localcoord. Don't you think is a good idea giving support for localcoord? Also, there'll be full compatibility with RC mugen? It would be nice if we where able to build sffv2 as well, so it would be easier to try our own add-ons.
-Toshio Tenma