Stage edge problem

[Luis]

Why every time I make a stage the edge of it looks like this? The guy in this tutorial video had the same problem: https://www.youtube.com/watch?v=Pq2hYS6Bhsw

[Noctis]

You have it tiled and either the image is off center or the boundleft/boundright parameters are too high. Lower them. As for the bottom. Mess with the boundlow, zoffset or the sprites positioning. I'm not sure about the bottom part honestly. I myself have trouble understanding it.

[Luis]

Lowering it worked. I will do this to my other stages. The bottom looks like that because the picture is high above the plus sign. I don't think anything can be done about that because the floor of the picture is at the bottom. It will look weird if I put the picture more down and the characters are floating in the air.

[0megaturb0]

i think the best thing to do is center the image in fighter factory using the little plus sign looking icons and make sure the image is set to zero on the (start inside the .def  file then adjust the sprite accordingly so characters are standing at the right height in fighter factory and then bring in the bound left and right equal amounts tell your satisfied, note that you can leave your mugen open and adjust ff or def file as long as you save either or every time the stage reloads (example in training esc select the stage again for the next match, it helps to set it to the last stage or make note of its number) it will show your adjustments
     Posted: July 22, 2015, 05:56:43 AM
you can adjust the fighters to stand lower by adjusting the z offset i think about 220 is a good number and 225 will make them even lower correct me if im wrong, also a neat trick to expand the floor downwards is to copy the image flip it both vertical and horizon and line it up then crop it ill post a picture example in a moment
     Posted: July 22, 2015, 06:06:58 AM

[Luis]

How do you copy the picture in fighter factory?

[0megaturb0]

you cant as far as i know you have to do it in another program